12V 5A LiFePO4 Battery Charger

Product introduction:

Battery charger 14.6V, lifepo4 battery charger, connector and plug can be customized

Additional Information:

Tel : +86 755 28761295, +86 18018761760
Mail: christin@lithiumvalley.com, roy@lithiumvalley.com

 

NO.ItemsSpecification
Input CharacteristicsInput voltage100-240V~, 50/60Hz
Max. Input current5A
Output CharacteristicsMax. Output VoltageAs below list
Max. Output CurrentAs below list
Battery Capacity1000mAh Min
Efficiency80% Min
Power IndicationLED=Red: In charging
LED=Green: Fully charged
Charging Supervision and Protection MechanismOver Voltage ProtectionYES
Output Reverse ProtectionYES
CC CVYES
EnvrionmentOperation Temperature32-140F
Operation Humidity20-85%
Storage Temperature40-80F
Storage Humidity10-95%
MechanicalDimension
AC InletC6 / C8 / C14 / Two Cord
Weight500G
Output Cable1.2m 2464 18AWG
Connector 5.5×2.1mm (Customizable )
Charge Instruction
1. Make sure your AC supply source is 100-240V and your battery pack match with the battery requirement.
2. Connect the charger to the AC outlet. LED=Green: it means power on and no battery connected.
3. Connect DC output to battery pack terminals. LED turn into red. It means in charging.
4. When LED turns Green, the battery pack is fully charged. You can charge next battery pack or switch off the power.
Notice
1. Make sure your battery voltage match with your charger.
2. Always place the charger in well-ventilated, dry environment and indoor use only.
3. Never charge other type batteries except Li-ION/Polymer.
4. Subject to change without prior notice, please contact us for the latest information.
5. Indoor used only, never expose the charger to water such as rain and splash.
6. Make sure good ventilation is provided when charger operation. Never place the charger near radiator, heat register or similar heat source when in charging.

 

Send Message to us